HP 2530-8-PoE+ Internal PS Switch
Fixed Port L2 Managed Ethernet Switches

Features & Benefits:

Quality of Service (QoS)

• Traffic prioritization (IEEE 802.1p) — allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP)
• Simplified QoS configuration —
  • Port-based — prioritize traffic by specifying a port and priority level
  • VLAN-based — prioritize traffic by specifying a VLAN and priority level
• Class of Service (CoS) — sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
• Rate limiting — sets per-port ingress enforced maximums for all ingressed traffic, or for broadcast, multicast or unknown destination traffic
• Layer 4 prioritization — enables prioritization based on TCP/UDP port numbers
• Flow control — helps deliver reliable communication during full-duplex operation

Management

• Choice of management interfaces —
  • Web graphical user interface (GUI) — HTML-based easy-to-use graphical interface allows configuration of the switch from any Web browser
  • Command-line (CLI) — robust command-line interface provides advanced configuration and diagnostics
  • Simple Network Management Protocol (SNMPv1/v2c/v3) — allows switch to be managed with a variety of third-party network management applications
• Virtual stacking — single IP address management up to 16 switches
• sFlow (RFC 3176) — wire-speed traffic accounting and monitoring configured by SNMP and CLI with three terminal encrypted receivers
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP) — automates device discovery protocol for easy mapping by network management applications
• Logging — provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated
• Port mirroring — allows traffic to be mirrored on any port or a network analyzer to assist with diagnostics or detecting network attacks
• RMON (remote monitoring) — provides advanced monitoring and reporting capabilities for statistics, history, alarms and events
• Find-Fix-Inform — finds and fixes common network problems automatically, then informs the administrator
• Friendly port names — allow assignment of descriptive names to ports
• Dual flash images — provide independent primary and secondary operating system files for backup while upgrading
• Multiple configuration files — allow multiple configuration files to be stored to a flash image
• Front-panel LEDs —
  • Locator LED — allows users to set the locator LED on a specific switch to either turn on, blink, or turn off; simplifies troubleshooting by making it easy to locate a particular switch within a rack of similar switches
  • Per-port LEDs — provides an at-a-glance view of status, activity, speed and full-duplex operation
  • Power and fault LEDs — display any issues

Connectivity

• IPv6 —
  • IPv6 host — allows the switch to be deployed and managed at the edge of an IPv6 network
  • Dual stack (IPv4/IPv6) — supports connectivity for both protocols; provides a transition mechanism from IPv4 to IPv6
  • MLD snooping — forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network
• IEEE 802.3af Power over Ethernet (PoE) — provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras
• IEEE 802.3at Power over Ethernet Plus — provides up to 30 W per port to IEEE 802.3 for PoE/PoE+ powered devices such as video IP phones, IEEE 802.11n wireless access points and advanced pan/tilt/zoom security cameras (see product specifications for total PoE power available)
• Auto-MDIX — adjusts automatically for straight-through or crossover cables on all ports
• Pre-standard PoE support — detects and provides power to pre-standard PoE devices; see list of supported devices in the product FAQ at www.hp.com/networking/support
• Small Form-Factor Pluggable (SFP) slots — provides fiber connectivity such as Gigabit-SX, -LX, -LH, and -BX with four SFP slots
• Dual-personality (RJ-45 or USB micro-B) serial console port — gives easy access to switch CLI via front switch location of dual-personality RJ-45 or USB micro-B serial console port

Layer 2 switching

• VLANs — provide support for 512 VLANs and 4,094 VLAN IDs
• Jumbo packet support — supports up to 9220-byte frame size to improve the performance of large data transfers
• 16K MAC address table — provides access to many Layer 2 devices
• GARP VLAN Registration Protocol — allows automatic learning and dynamic assignment of VLANs

Security

• Access control lists (ACLs) — accomnodates IPv4/IPv6 port and VLAN-based ACLs
• Source-port filtering — allows only specified ports to communicate with each other
• RADIUS/TACACS+ — eases switch management security administration by using a password authentication server
• Secure Sockets Layer (SSL) — encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
• Port security — allows access only to specified MAC addresses, which can be learned or specified by the administrator
• MAC address lockout — prevents particular configured MAC addresses from connecting to the network
• Multiple user authentication methods —
  • IEEE 802.1X — is an industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server
  • Web-based authentication — similar to IEEE 802.1X, it provides a browser-based environment to authenticate clients that do not support the IEEE 802.1X supplicant
  • MAC-based authentication — authenticates the client with the RADIUS server based on the client's MAC address
• Secure Shell (SSHv2) (client and server) — encrypts all transmitted data for secure, remote CLI access over IP networks
• Secure Shell — encrypts all transmitted data for secure remote CLI access over IP networks
• STP BPDU port protection — blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
• STP Root Guard — protects the root bridge from malicious attacks or configuration mistakes
• Secure management access — securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2 and SNMPv3
• Custom banner — displays security policy when users log in to the switch
• Secure FTP — allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
• Protected ports CLI — offers intuitive CLI to configure the source-port filters feature by allowing specified ports to be isolated from all other ports on the switch; the protected port or ports can communicate only with the uplink or shared resources
• Authentication flexibility —
  • Multiple IEEE 802.1X users per port — provides authentication of up to eight IEEE 802.1X users per port; prevents user "piggybacking" on another user's IEEE 802.1X authentication
  • Concurrent IEEE 802.1X and Web or MAC authentication schemes per port — switch port will accept any of IEEE 802.1X and either Web or MAC authentications
• Switch management logon security — helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication

Convergence

• LLDP-MED (Media Endpoint Discovery) — is a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones
• IP multicast (data-driven IGMP) — automatically prevents flooding of IP multicast traffic
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP) — is an automated device discovery protocol that provides easy mapping of network management applications
• PoE and PoE+ allocations — support multiple method (automatic, IEEE 802.3at dynamic, LLDP-MED fine grain, IEEE 802.3af device class, or user specified) to allocate and manage PoE/PoE+ power for more efficient energy saving
• Voice VLAN — uses LLDP-MED to automatically configure a VLAN for IP phones
• IP multicast (data-driven IGMPv3) — automatically prevents flooding of IP multicast traffic

Resiliency and high availability

• Port trunking and link aggregation —
  • Trunking — supports up to eight links per trunk to increase bandwidth and create redundant connections. Supports L2, L3, and L4 trunk-load-balancing algorithm
  • IEEE 802.3ad Link Aggregation Protocol (LACP) — eases configuration of trunks through automatic configuration
• IEEE 802.1s Multiple Spanning Tree — provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w

Product architecture

• Energy-efficient design —
  • IEEE 802.3az — reduces power consumption during periods of low data activity
  • Port low power mode — when no link is detected on a port, the port will automatically go into low-power mode to conserve energy
  • Fans — variable speed fans help reduce power consumption
  • Port LEDs — port link and activity LEDs can be turned off to conserve energy
• Switch on a chip — provides highly integrated, high-performance switch design with a non-blocking architecture

Flexibility

• Flexible mounting —
  • Rackable — mountable in a standard 19-inch rack using included hardware
  • Wall mountable — allows the switch to be mounted to a wall using included hardware
  • Surface mountable — allows the switch to be mounted above or below a surface (such as a desk or table) with included hardware
• Quiet operation — variable-speed fans adjust for the operating environment while lowering noise and energy consumption needs

Warranty and support

• Lifetime warranty — for as long as you own the product with advance replacement and next-business-day delivery (available in most countries)†
• Electronic and telephone support — limited electronic and telephone support is available from HP; to reach our support centers, refer to www.hp.com/networking/contact-support; for details on the duration of support provided with your product purchase, refer to www.hp.com/networking/warrantysummary
• Software releases — to find software for your product, refer to www.hp.com/networking/support; for details on the software releases available with your product purchase, refer to www.hp.com/networking/warrantysummary

Specifications:

	HP 2530-8-PoE+ Internal PS Switch
Part Number	HP 2530-8-PoE+ Internal PS Switch (JL070A)
Ports
	8 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: half or full 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10BASE-T; IEEE 802.3u Type 100BASE-TX; IEEE 802.3ab 1000BASE-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports 1 dual-personality (RJ-45 or USB micro-B) serial console port
Physical characteristics
	10(w) x 9.68(d) x 1.75(h) in (25.4 x 24.59 x 4.45 cm) (1U height)
Weight	4.65 lb (2.11 kg)
Memory and processor
Processor	ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 1.5 MB dynamically allocated
Mounting
	Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); Horizontal surface mounting; Wall mounting
Performance
	IPv6 Ready Certified
1000 Mb Latency	< 1.3 μs (LIFO 64-byte packets)
Throughput	up to 4.1 Mpps (64-byte packets)
Switching capacity	5.6 Gbps
MAC address table size	16000 entries
Environment
Operating temperature	32°F to 113°F (0°C to 45°C)
Operating relative humidity	15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature	-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity	15% to 90% @ 149°F (65°C), noncondensing
Altitude	up to 10,000 ft (3 km)
Acoustic	Power: 0 dB, Pressure: 0 dB
Electrical characteristics
Maximum heat dissipation	29 BTU/hr(30.6 kJ/hr), (switch only: 29 BTU/hr; combined switch + max. PoE devices: 239 BTU/hr)
Voltage	100-127/200-240 VAC
Current	0.9/0.5 A
Idle power	5.3 W
Maximum power rating	70.2 W
PoE power	67 W PoE
Frequency	50/60 Hz
Notes	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the total power budget available to all PoE ports.
Safety
	UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1
Notes
	IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af apply to PoE+ models only. When using SFPs with this product, SFPs with revision “B” or later (product number ends with the letter “B” or later, e.g., J4858B, J4859C) are required.

Documentation:

Download the HP 2530 Switch Series Datasheet (PDF).