HP 8200 zl Switch Series
High performance, full-featured, highly available modular switch

Features & Benefits:

Software-defined networking

• NEW OpenFlow — is a key technology that enables software-defined networking by allowing the separation of data (packet forwarding) and control (routing decision) paths

Quality of Service (QoS)

• Advanced classifier-based QoS — classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis
• Layer 4 prioritization — enables prioritization based on TCP/UDP port numbers
• Traffic prioritization — allows real-time traffic classification into eight priority levels mapped to eight queues
• Bandwidth shaping —
  • Port-based rate limiting — provides per-port ingress-/egress-enforced increased bandwidth
  • Classifier-based rate limiting — uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port
  • Reduced bandwidth — provides per-port, per-queue egress-based reduced bandwidth
• Class of Service (CoS) — sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ

HP AllianceOne integration

• HP AllianceONE Services zl Module — allows you to embed applications directly into the network, either distributed throughout the network at the network edge or centralized in the core or distribution layer; for more information about the HP AllianceONE solution, visit the HP website

Management

• Remote intelligent mirroring — mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP 8200 zl, 6600, 6200 yl, 5400 zl, or 3500 Switch anywhere on the network
• RMON, XRMON, and sFlow v5 — provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP) — advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
• Uni-Directional Link Detection (UDLD) — monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional link into a unidirectional one; this prevents network problems such as loops
• HP unified core-to-edge device/network management tools — provide HP networking portfolio-common device-level tools (CLI, Web GUI, and Menu) plus seamless integration into HP PCM+/Identity Driven Manager (IDM) network management deployments
• Command authorization — leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; an audit trail documents activity
• Friendly port names — allow assignment of descriptive names to ports
• Dual flash images — provides independent primary and secondary operating system files for backup while upgrading or fine-tuning the switch configuration
• Multiple configuration files — can be stored to the flash image
• HP unified core-to-edge features — HP ProVision portfolio-common feature implementation allows faster solution deployment
• NEW Comware CLI —
  • Comware-compatible CLI — bridges the experience of HP Comware CLI users who are using the HP ProVision software CLI
  • Display and fundamental Comware CLI commands — are embedded in the switch CLI as native commands; display output is formatted as on Comware-based switches, and fundamental commands provide a Comware-familiar initial switch setup
  • Configuration Comware CLI commands — when Comware commands are entered, CLI help is elicited to formulate the correct ProVision software CLI command

Connectivity

• High-density port connectivity — provides 12 interface module slots, up to 288 wire-speed 10/100/1000 PoE-enabled ports, or 96 10-GbE ports per system
• IEEE 802.3az Energy Efficient Ethernet — lowers power consumption in periods of low-link usage (supported on v2 zl 10/100/1000 and 10/100 modules)
• IEEE 802.3af Power over Ethernet (PoE) — provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras
• IEEE 802.3at Power Over Ethernet Plus — provides up to 30 W per port to IEEE 802.3 for PoE-/PoE+-powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/zoom/tilt security cameras
• Jumbo frames — on Gigabit Ethernet and 10-Gigabit Ethernet ports, jumbo frames allow high-performance remote backup and disaster-recovery services
• HP unified core-to-edge hardware — HP ProVision family-common interface and service modules, Gigabit optics/10 GbE transceivers, and power supplies enable sparing simplicity
• Prestandard PoE support — detects and provides power to prestandard PoE devices; see the list of supported devices in the product FAQs at www.hp.com/networking
• Auto-MDIX — automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
• IPv6 —
  • IPv6 host — enables switches to be managed in an IPv6 network
  • Dual stack (IPv4 and IPv6) — transitions from IPv4 to IPv6, supporting connectivity for both protocols
  • MLD snooping — forwards IPv6 multicast traffic to the appropriate interface
  • IPv6 ACL/QoS — supports ACL and QoS for IPv6 network traffic
  • IPv6 routing — supports static and OSPFv3 routing protocols
  • 6in4 tunneling — supports encapsulation of IPv6 traffic in IPv4 packets

Performance

• High-speed, high-capacity architecture — 1.12 Tbps crossbar switching fabric provides intra-module and inter-module switching with 739.2 million pps throughput on the purpose-built HP ProVision ASICs
• Selectable queue configurations — allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications
• Scalable system design — chassis architecture/backplane provides built-in performance capacity/headroom to support next-generation high-density/high-speed connectivity

Resiliency and high availability

• Nonstop switching — improves network availability to better support critical applications such as unified communication and mobility; interface and fabric modules continue switching traffic during failover from active to standby management module
• Nonstop routing — enhances Layer 3 high availability; OSPFv2/v3 and VRRP will continue to operate and route network traffic during failover from an active to a standby management module
• Redundant management, fabric, and power — provide enhanced system availability and continuity of operations
• Distributed trunking — enables loop-free and redundant network topology without using Spanning Tree Protocol; allows a server or switch to connect to two switches using one logical trunk for redundancy and load sharing
• IEEE 802.1s Multiple Spanning Tree Protocol — provides high link availability in multiple VLAN environments by allowing multiple spanning trees; encompasses IEEE 802.1D Spanning Tree Protocol and IEEE 802.1w Rapid Spanning Tree Protocol
• IEEE 802.3ad Link Aggregation Control Protocol (LACP) and HP port trunking — support up to 144 trunks, each with up to eight links (ports) per trunk
• Proven ASIC and system architecture — the HP ProVision ASIC and platform architecture, leveraged from HP's successful 5400 zl, 3500, 6600, and 6200 yl switch series, reduces technology risk and provides reliable support and flexibility
• HP zl family components — employ market-proven intelligent edge switch interface modules, optics, and power supplies to reduce technology risk and enhance system reliability
• Hot-swappable modules — interface, management, and fabric modules as well as mini-GBIC optics and power supplies can be removed, swapped, or added to the system without interrupting ongoing switch operations
• Redundant, hot-swappable cooling — redundant fan design and hot-swappable fan tray provide continuity of operation in case of a single fan failure
• Passive system design — passive chassis backplane (no traffic-forwarding active componentry) provides system reliability and reduces the impact of a component failure
• Virtual Route Redundancy Protocol — allows groups of two routers to dynamically back each other up to create highly available routed environments

Layer 2 switching

• VLAN support and tagging — supports the IEEE 802.1Q standard and 2,048 VLANs simultaneously
• IEEE 802.1v protocol VLANs — isolate select non-IPv4 protocols automatically into their own VLANs
• GARP VLAN Registration Protocol — allows automatic learning and dynamic assignment of VLANs
• IEEE 802.1ad Q-in-Q — increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple LANs on a high-speed campus or metro network
• MAC-based VLAN — provides granular control and security; uses RADIUS to map a MAC address/user to specific VLANs (requires v2 modules)
• Rapid Per-VLAN Spanning Tree (RPVST+) — allows each VLAN to build a separate spanning tree to improve link bandwidth usage; is compatible with PVST+
• HP switch meshing — dynamically load balances across multiple active redundant links to increase available aggregate bandwidth; allows concurrent Layer 3 routing with v2 modules

Layer 3 services

• User Datagram Protocol (UDP) helper function — allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP
• Loopback interface address — defines an address in Routing Information Protocol (RIP) and Open Standard Path First (OSPF), improving diagnostic capability
• Route maps — provide more control during route redistribution; allow filtering and altering of route metrics

Layer 3 routing

• Static IP routing — provides manually configured routing for both IPv4 and IPv6 networks
• Routing Information Protocol (RIP) — provides RIPv1 and RIPv2 routing
• OSPF — provides OSPFv2 for IPv4 routing and OSPFv3 for IPv6 routing
• Policy-based routing — uses a classifier to select traffic that can be forwarded based on policy set by the network administrator (requires v2 modules)
• Border Gateway Protocol (BGP) — provides IPv4 Border Gateway Protocol routing, which is scalable, robust, and flexible

Security

• Access control lists (ACLs) — provide filtering based on the IP field, source/destination IP address/subnet, and source/destination TCP/UDP port number on a per-VLAN or per-port basis
• Multiple user authentication methods —
  • IEEE 802.1X users per port — provides authentication of multiple IEEE 802.1X users per port
  • Web-based authentication — authenticates from a Web browser for clients that do not support IEEE 802.1X supplicant
  • MAC-based authentication — authenticates client with the RADIUS server based on a client's MAC address
  • Concurrent IEEE 802.1X, Web, and MAC authentication schemes per port — accepts up to 32 sessions of IEEE 802.1X, Web, and MAC authentications
• Virus throttling — detects traffic patterns typical of worm-type viruses and either throttles or entirely prevents the virus from spreading across the routed VLANs or bridged interfaces without requiring external appliances
• DHCP protection — blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
• Secure management access — securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
• Management Interface Wizard — helps secure management interfaces such as SNMP, telnet, SSH, SSL, Web, and USB at the desired level
• Switch CPU protection — provides automatic protection against malicious network traffic trying to shut down the switch
• ICMP throttling — defeats ICMP denial-of-service attacks by enabling any switch port to automatically throttle ICMP traffic
• Identity-driven ACL — enables implementation of a highly granular and flexible access security policy and VLAN assignment specific to each authenticated network user
• STP BPDU port protection — blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
• Dynamic IP lockdown — works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofing
• Dynamic ARP protection — blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
• Detection of malicious attacks — monitors 10 types of network traffic and sends a warning when an anomaly that potentially can be caused by malicious attacks is detected
• Port security — allows access only to specified MAC addresses, which can be learned or specified by the administrator
• MAC address lockout — prevents particular configured MAC addresses from connecting to the network
• Source-port filtering — allows only specified ports to communicate with each other
• RADIUS/TACACS+ — eases switch management security administration by using a password authentication server
• Secure shell — encrypts all transmitted data for secure remote CLI access over IP networks
• Secure Sockets Layer (SSL) — encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
• Secure FTP — allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file
• Switch management logon security — helps secure switch CLI logon by optionally requiring either RADIUS or TACACS+ authentication
• Security banner — displays a customized security policy when users log in to the switch
• USB Secure Autorun (requires HP PCM+) — deploys, diagnoses, and updates a switch using a USB flash drive; works with a secure credential to prevent tampering
• STP Root Guard — protects the root bridge from malicious attacks or configuration mistakes
• Integrated Threat Management applications — includes advanced, scalable, switch-integrated security tools such as stateful firewall, intrusion detection/prevention system (IDS/IPS), and VPN concentrator via the HP Threat Management Services zl Module

Convergence

• IP multicast routing — includes PIM Sparse and Dense modes to route IP multicast traffic
• IP multicast snooping (data-driven IGMP) — automatically prevents flooding of IP multicast traffic
• LLDP-MED (Media Endpoint Discovery) — is a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones
• PoE allocations — support multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user specified) to allocate PoE power for more efficient energy savings
• Auto VLAN configuration for voice —
  • RADIUS VLAN — uses a standard RADIUS attribute and LLDP-MED to automatically configure a VLAN for IP phones
  • CDPv2 — uses CDPv2 to configure legacy IP phones

Flexibility

• Unified wired and wireless deployment and management — employs the MSM765zl mobility controller and offers secure, advanced wireless services with simplified management and unified wired and wireless operation across the network
• Complete feature set — provides Gigabit PoE for edge VoIP solutions, scalable 10 GbE for enterprise-class distribution-layer implementations, advanced wireless management for comprehensive mobility solutions, and critical high-availability features for midmarket core network deployments
• Programmable ASIC design — allows the seamless addition of new QoS and security features over time without costly hardware upgrades

Warranty and support

• Lifetime warranty — for as long as you own the product with advance replacement and next-business-day delivery (available in most countries)†
• Electronic and telephone support — limited electronic and telephone support is available from HP; to reach our support centers, refer to www.hp.com/networking/contact-support; for details on the duration of support provided with your product purchase, refer to www.hp.com/networking/warrantysummary
• Software releases — to find software for your product, refer to www.hp.com/networking/support; for details on the software releases available with your product purchase, refer to www.hp.com/networking/warrantysummary

Specifications:

	8206	8212	8206-44G-PoE+-2XG v2
Part Numbers	HP 8206 zl Switch with Premium Software (J9640A)	HP 8212 zl Switch with Premium Software (J9641A)	HP 8206-44G-PoE+-2XG v2 zl Switch with Premium Software (J9638A)
Included accessories
	1 HP 8200 zl Management Module (J9092A) 2 HP 8200 zl Fabric Module (J9093A) 1 HP 8200 zl System Support Module (J9095A)	1 HP 8200 zl Management Module (J9092A) 2 HP 8200 zl Fabric Module (J9093A) 1 HP 8200 zl System Support Module (J9095A) 1 HP 8200 zl Switch Premium License (J9474A)	1 HP 8200 zl Management Module (J9092A) 2 HP 8200 zl Fabric Module (J9093A) 1 HP 8200 zl System Support Module (J9095A) 1 HP 1500W PoE+ zl Power Supply (J9306A) 1 HP 24-port Gig-T PoE+ v2 zl Module (J9534A) 1 HP 20-port Gig-T PoE+ / 2-port 10GbE SFP+ v2 zl Module (J9536A) 1 HP 8200 zl Switch Premium License (J9474A)
Ports
	6 open module slots Supports a maximum of 144 autosensing 10/100/1000 ports or 48 10GbE ports or 144 mini-GBICs, or a combination	12 open module slots Supports a maximum of 288 autosensing 10/100/1000 ports or 96 10GbE ports or 288 mini-GBICs, or a combination	44 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+) Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 SFP+ 10GbE ports Duplex: full only 4 open module slots Supports a maximum of 144 autosensing 10/100/1000 ports or 48 10GbE ports or 144 mini-GBICs, or a combination
Power supplies
	2 power supply slots 1 minimum power supply required (ordered separately)	4 power supply slots 2 minimum power supplies required (ordered separately)	2 power supply slots 1 minimum power supply required includes: 1 x J9306A (HP 1500W PoE+ zl Power Supply)
Physical characteristics
	17.42(w) x 17.49(d) x 10.35(h) in (44.25 x 44.42 x 26.29 cm) (6U height)	17.5(w) x 18.7(d) x 15.6(h) in (44.45 x 47.5 x 39.62 cm) (9U height)	17.42(w) x 17.49(d) x 10.35(h) in (44.25 x 44.42 x 26.29 cm) (6U height)
Weight	48.1 lb (21.82 kg)	50.44 lb (22.88 kg)	61.49 lb (27.89 kg)
Memory and processor
Gigabit module	ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM	ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM	ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM
10G module	ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM	ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM	ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM
Management module	Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM	Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM	Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM
Mounting
	Mounts in an EIA-standard 19 in telco rack/equipment cabinet (hardware included); horizontal surface mounting only. An optional 4-post cabinet rail is available (see ordering guide).	Mounts in an EIA-standard 19 in telco rack or equipment cabinet (hardware included); horizontal surface mounting only. An optional 4-post cabinet rail is available (see ordering guide).	Mounts in an EIA-standard 19 in telco rack/equipment cabinet (hardware included); horizontal surface mounting only. An optional 4-post cabinet rail is available (see ordering guide).
Performance
1000 Mb Latency	< 3.7 µs (FIFO 64-byte packets)	< 3.7 µs (FIFO 64-byte packets)	< 3.7 µs (FIFO 64-byte packets)
10 Gbps Latency	< 2.1 µs (FIFO 64-byte packets)	< 2.1 µs (FIFO 64-byte packets)	< 2.1 µs (FIFO 64-byte packets)
Throughput	up to 369.6 million pps	up to 739 million pps	up to 369.6 million pps
Routing/Switching capacity	496.8 Gbps	993.6 Gbps	496.8 Gbps
Switch fabric speed	561.6 Gbps	1.1 Tbps	561.6 Gbps
Routing table size	10000 entries (IPv4)	10000 entries (IPv4)	10000 entries (IPv4)
MAC address table size	64000 entries	64000 entries	64000 entries
Environment
Operating temperature	32°F to 113°F (0°C to 45°C)	32°F to 113°F (0°C to 45°C)	32°F to 113°F (0°C to 45°C)
Operating relative humidity	15% to 95% @ 131°F (55°C), noncondensing	15% to 95% @ 131°F (55°C), noncondensing	15% to 95% @ 131°F (55°C), noncondensing
Nonoperating/Storage temperature	-40°F to 158°F (-40°C to 70°C)	-40°F to 158°F (-40°C to 70°C)	-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity	15% to 95% @ 149°F (65°C), noncondensing	15% to 95% @ 149°F (65°C), noncondensing	15% to 95% @ 149°F (65°C), noncondensing
Altitude	up to 10,000 ft (3 km)	up to 10,000 ft (3 km)	up to 10,000 ft (3 km)
Acoustic	Power: 60.0 dB, Pressure: 41.3 dB; ISO 7779, ISO 9296	Power: 63.0 dB, Pressure: 47.8 dB; ISO 7779, ISO 9296	Power: 60.0 dB, Pressure: 41.3 dB; ISO 7779, ISO 9296
Electrical characteristics
Frequency	50/60 Hz	50/60 Hz	50/60 Hz
	Achieved Miercom Certified Green Award	Achieved Miercom Certified Green Award	Achieved Miercom Certified Green Award
Description	Chassis ships without power supplies. Two power supply slots are available; three different power supplies are available. See power supply products for additional specifications.	Chassis ships without power supplies. Four power supply slots are available; three different power supplies are available. See power supply products for additional specifications.	Chassis ships without power supplies. Two power supply slots are available; three different power supplies are available. See power supply products for additional specifications.
Maximum heat dissipation	2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE); 3700 BTU/hr (3903 kJ/hr) (max. PoE)	4900 BTU/hr (5170 kJ/hr), (max. non-PoE); 7400 BTU/hr (7807 kJ/hr) (max. PoE)	2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE); 3700 BTU/hr (3903 kJ/hr) (max. PoE)
Voltage	100-127/200-240 VAC	100-127/200-240 VAC	100-127/200-240 VAC
Notes	Power supplies must be ordered separately. A minimum of one J8712A, J8713A, or J9306A supply is required to power the system.	Power supplies must be ordered separately. A minimum of two J8712A, J8713A, or J9306A supplies are required to power the system.	Power supplies must be ordered separately. A minimum of one J8712A, J8713A, or J9306A supply is required to power the system.
Safety
	CSA 22.2 No. 60950UL 60950IEC 60950EN 60950IEC 60825	CSA 22.2 No. 60950UL 60950IEC 60950EN 60950IEC 60825	CSA 22.2 No. 60950UL 60950IEC 60950EN 60950IEC 60825
Notes
	Interface/Service modules, power supplies, and redundant management module must be ordered separately. RS-232C console port via an RJ-45 connector. Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; for example, J9142B, J8177C).	Interface/Service modules, power supplies, and redundant management module must be ordered separately. RS-232C console port via an RJ-45 connector. Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; for example, J9142B, J8177C).	Interface/Service modules, power supplies, and redundant management module must be ordered separately. RS-232C console port via an RJ-45 connector. Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; for example, J9142B, J8177C).

	HP 8212-92G-PoE+-2XG v2 zl Switch with Premium Software (J9639A)
Included accessories
	1 HP 8200 zl Management Module (J9092A) 2 HP 8200 zl Fabric Module (J9093A) 1 HP 8200 zl System Support Module (J9095A) 1 HP 8200 zl Switch Premium License (J9474A) 2 HP 1500W PoE+ zl Power Supply (J9306A) 3 HP 24-port Gig-T PoE+ v2 zl Module (J9534A) 1 HP 20-port Gig-T PoE+ / 2-port 10GbE SFP+ v2 zl Module (J9536A)
Ports
	92 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+) Media Type: Auto-MDIX Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 SFP+ 10GbE ports Duplex: full only 8 open module slots Supports a maximum of 288 autosensing 10/100/1000 ports or 96 10GbE ports or 288 mini-GBICs, or a combination
Power supplies
	4 power supply slots 2 minimum power supplies required includes: 2 x J9306A (HP 1500W PoE+ zl Power Supply)
Physical characteristics
	17.5(w) x 18.7(d) x 15.6(h) in (44.45 x 47.5 x 39.62 cm) (9U height)
Weight	102.76 lb (46.61 kg)
Memory and processor
Gigabit module	ARM9 @ 200 MHz; packet buffer size: 144 Mb QDR SDRAM
10G module	ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM
Management module	Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM
Mounting
	Mounts in an EIA-standard 19 in telco rack or equipment cabinet (hardware included); horizontal surface mounting only. An optional 4-post cabinet rail is available (see ordering guide).
Performance
1000 Mb Latency	< 3.7 µs (FIFO 64-byte packets)
10 Gbps Latency	< 2.1 µs (FIFO 64-byte packets)
Throughput	up to 739 million pps
Routing/Switching capacity	993.6 Gbps
Switch fabric speed	1.1 Tbps
Routing table size	10000 entries (IPv4)
MAC address table size	64000 entries
Environment
Operating temperature	32°F to 113°F (0°C to 45°C)
Operating relative humidity	15% to 95% @ 131°F (55°C), noncondensing
Nonoperating/Storage temperature	-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity	15% to 95% @ 149°F (65°C), noncondensing
Altitude	up to 10,000 ft (3 km)
Acoustic	Power: 63.0 dB, Pressure: 47.8 dB; ISO 7779, ISO 9296
Electrical characteristics
Frequency	50/60 Hz
	Achieved Miercom Certified Green Award
Description	Chassis ships without power supplies. Four power supply slots are available; three different power supplies are available. See power supply products for additional specifications.
Maximum heat dissipation	4900 BTU/hr (5170 kJ/hr), (max. non-PoE); 7400 BTU/hr (7807 kJ/hr) (max. PoE)
Voltage	100-127/200-240 VAC
Notes	Power supplies must be ordered separately. A minimum of two J8712A, J8713A, or J9306A supplies are required to power the system.
Safety
	CSA 22.2 No. 60950UL 60950IEC 60950EN 60950IEC 60825
Notes
	Interface/Service modules, power supplies, and redundant management module must be ordered separately. RS-232C console port via an RJ-45 connector. Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; for example, J9142B, J8177C).

Documentation:

Download the HP 8200 zl Switch Series Datasheet (PDF).